Routing protocol(라운팅 프로토콜) : 라우터가 라우팅을 할때 사용하는 라우팅 프로토콜을 수집할때 사용.
DCE 케이블 :
ㅣ
V.35 케이블
ㅣ
DTE 케이블 :
[Router 설정]
<R1>
Router(config)#int fa0/0
Rounter(config-if)#ip add 192.168.10.1 255.255.255.0
Router(config-if)#int s0/0/0
Router(config-if)#ip add 1.1.12.1 255.255.255.0
Router(config-if)#no sh
<R2>
Router(config)#int fa0/0
Router(config-if)#ip add 192.168.20.1 255.255.255.0
Router(config-if)#no sh
Router(config-if)#int s0/0/0
Router(config-if)#ip add 1.1.12.2 255.255.255.0
Router(config-if)#no sh
----------------------------------------------------------------------
[Routing Table]
Router(config-if)#do sh ip route
1.0.0.0/8 is variably subnetted, 2 subnets, 2 masks
C 1.1.12.0/24 is directly connected, Serial0/0/0
C 192.168.10.0/24 is directly connected, FastEthernet0/0
=============================================
[IP Routing]
<1>
Router(config)#ip route[목적지 네트워크] [Next Hop]
Router(config)#ip route 192.168.30.0 255.255.255.0 1.1.12.2
----------------------------------------------------------------------
<2>
Router(config)#ip route[목적지 네트워크] [자신의 출구 인터페이스 번호]
Router(config)#ip route 192.168.30.0 255.255.255.0 s0/0/0
